5.2 未來展望
本論文已探討漸開線正齒輪設計參數對於泵浦容積與流率變動之研究，包括 模數、齒數與壓力角等條件之影響。結果顯示最高容積效率的漸開線正齒輪泵浦 設計，但其流率變動特性常非最佳；而關於所進行泵浦齒輪對的初步動態分析結 果，齒輪泵浦在不同操作條件下其動態齒根應力也極為不同。本研究成果可提供 給設計者，作為漸開線正齒輪泵浦設計之參考。
未來關於齒輪泵浦容積與流率之研究，可進ㄧ步考慮如非對稱壓力角齒形、
齒輪過切、齒頂導角及非漸開線齒形之齒輪泵浦等，另外如考慮洩漏之齒輪泵浦 容積與流率分析、螺旋齒輪泵浦之研究、或理論數值解與實驗結果之比較驗證等，
皆有助於此領域研究之進展。
關於齒輪泵浦之動態分析，本文以極簡化的齒輪軸轉速與扭矩之條件設定，
僅初步進行了泵浦齒輪對的動態分析，而應用有限元素分析軟體之更完整齒輪泵 浦條件設定，如泵浦內腔齒輪對輸送液體容積轉換之變化，造成泵浦內腔壓力、
溫度及液體洩漏變化情形之模擬探討，更完整的掌握齒輪泵浦系統的最佳設計與 應用技術，以上都是未來值得探討之課題。
參考文獻
1. K. Nagamura, K. Ikejo and F. G. Tutulan, 2004, “Design and performance of gear pumps with a non-involute tooth profile,” Proc. Instn. Mech. Engrs Part B: J.
Engineering Manufacture, Vol. 218, pp. 699-711.
2. 吳育仁、馮恒境、葉佳倫、陳重儒，2006，“外嚙合齒輪泵之卸壓槽設計及數 值模擬”，機械月刊，Vol. 32，No.8，pp. 40-49。
3. 李玉龍、王學軍、顏廣華，2004，“外嚙合困油歷程的仿真研究”，合肥學院機 械系(中國大陸)，Vol. 28，No.6，pp. 19-21。
4. 杜昌義，2002，“齒輪泵困油現象及卸荷措施的分析”，四川農機(中國大陸)，
pp. 24。
5. 鄭鳴，2005，“齒輪泵瞬時流量分析及改善措施”，天津成人高等學校聯合學報 (中國大陸)，Vol. 7，No.5，pp. 43-45。
6. B. Paffoni, 2003, “Pressure and film thickness in a trochoidal hydrostatic gear pump,” Proc. Instn. Mech. Engrs Part G:J. Aerospace Engineering, Vol. 217, pp.
179-187.
7. B. Paffoni, R. Progri and R Gras, 2004, “Teeth clearance effects upon pressure and film thickness in a trochoidal hydrostatic gear pump,” Proc. Instn. Mech. Engrs Part G:J. Aerospace Engineering, Vol. 218, pp. 247-256.
8. Hung-Cheng Liu, Shih-His Tong and Daniel C. H. Yang, 2000, “Trapping-Free Rotors for High-Sealing Lobe Pumps,” Transactions of the ASME, Vol. 122, pp.
536-542.
9. Y.W. Liu and K. Tang, 2004, “The design of asymmetric spur gear pump with crisscross spurs structures,” Journal of Dalian Ralway Institute, Vol. 25, No. 3, pp.
28-30.
10. 毛平淮、侯波，2005，“平面式並聯齒輪泵”，農業機械學報(中國大陸)，
Vol. 36, No.8，pp. 165-167。
11. K. Hou, 2004, “The design of compensating groove in external gear pump,” Fluid Power Transmission and Control, China, No.6(Serial/No.7) , pp. 31-33.
12. Noah D. Manring and Suresh B. Kasaragadda, 2003, “The theoretical flow ripple of an external gear pump,” Transactions of the ASME, Vol.125, pp. 396-404.
13. R. H. Frith, and W. Scott, 1996, “Comparison of an external gear pump wear model with test data,” Wear, Vol. 196, pp. 64-71.
14. Koc, E., and Hooke, C. J., 1997, “An experimental investigation into the design and performance of hydrostatically loaded floating wear plates in gear pumps,” Wear, Vol. 209, pp. 184-192.
15. Koc, E., 1994, “Bearing misalignment effects on the hydrostatic and hydrodynamic behaviour of gears in fixed clearance end plates, ” Wear, Vol. 173, pp. 199-206.
16. Koc, E., 1991, “An investigation into the performance of hydrostatically loaded end-plates in high pressure pumps and motors: movable plate design.” Wear, Vol.
141, pp. 249-265.
17. K. Foster, R. Taylor and I. M. Bidhendi, 1985, “Computer prediction of cyclic excitation sources for an external gear pump.” Proc. Inst. Mech. Eng., Part C: J.
Mech. Eng. Sci., Vol. 199, No. B3, pp. 175-180.
18. H. N. Ozguven and D. R. Houser, 1988, “Mathematical models used in gear dynamics - a review,” Journal of Sound and Vibration, Vol. 121, pp. 383-41.
19. M. H. Tsai and Y. C. Tsai, 1998, “Design of high-contact-ratio spur gears using quadratic parametric tooth profile,” Journal of Mechanism and Machine Theory, Vol. 33, pp. 551-564.
20. F. B. Oswald and D. P. Townsend, 1996, “Tooth modification and spur gear tooth strain,” Gear Technology, Vol. 13, pp. 20-24.