料下拉長補貨頻率。
第三年度：限制理論供應鏈之動態補貨機制研究
當瓶頸機台產能已接近飽和，若有額外的產能需求時，欲增加瓶頸機台也非 一時半刻可成。使用修正補貨頻率，降低換線次數、時間的方式以多爭取時間轉 做生產之用是工廠常見的手法之一，然而修正補貨頻率的時間點應為為何？因為 太頻繁的修正會使得系統太過緊張；反之，如果太久才修正一次，又會喪失動態 修正之效果。
故本研究採用管制圖的方式，利用對監控瓶頸產能之需求的方式，進而監視 市場銷售量，當市場銷售量做出改變時即為補貨頻率之修正點。本研究亦結合前 人之研究，在使用管制圖偵測補貨頻率需要修正後，應做出對應的政策。
研究成果發表情況
以上之研究成果，已發表於以下之期刊與會議。
1. Horng-Huei Wu, Ching-Piao Chen, Chih-Hung Tsai and Tai-Ping Tsai, 2010,
"A Study of an Enhanced Simulation Model for TOC Supply Chain Replenishment System under Capacity Constraint," Expert Systems with Applications, Vol.37, No.9, pp.6435-6440.
2. Wu, H.-H. and Tsai, T.-P., 2008, “An Enhanced Model for TOC Supply Chain Replenishment Systems under Capacity Constraint”, The Proceedings of 2008 IEEE Conference on Service Operations and Logistics, and Informatics, Beijing, China, October 12 to 15, pp. 2683-2688.]
3. Wu, H.H., and Jen, W.T., 2009, “A Methodology to Release the Inventory Shortage Impact for Prolonged Replenishment Frequency for TOC Supply Chain Replenishment Systems”, APIEMS 2009 - The Proceedings of Asia Pacific Industrial Engineering & Management Systems Conference 2009, Kitakyushu, Japan, December 14 to 16, pp. 507-517.
4. 吳鴻輝與任威達, 2009,「限制理論供應鏈補貨機制拉長補貨頻率之可行性評 估方法探討」,中國工業工程學會 98 年度年會論文集(光碟片), 12 月 12 日, 逢 甲大學, SM28.
5. Horng-Huei Wu and Wei-Ta Jen, 2010, “A Methodology to Evaluate the Feasibility and Plan for Prolongation of Replenishment Frequency for TOC Supply Chain Replenishment Systems,” International Conference on Engineering and Business Management (EBM 2010), March 25~27, Chengdu, China, pp.2571-2574.
6. 吳鴻輝與任威達, 2010,「供應鏈補貨機制之監控系統探討」, 2010 華人經濟 圈企業競爭力與經營管理學術研討會論文集(光碟片), 4 月 23 日, 中華大學, pp.1530-1545.
參考文獻
1. 吳鴻輝與蔡黛萍(2007)，「限制理論(TOC)供應鏈補貨機制之研究」，2007 管理 與教育學術研討會，光碟片，中華大學：新竹。
2. 李榮貴與張盛鴻，TOC 限制理論-從有「限」走向無限，中國生產力中心 (2005)。
3. 林則孟(2006)，生產計劃與管理，台北：華泰文化。
4. 林則孟，生產計劃與管理，華泰文化 (2006)。
5. 莊健鑫與吳鴻輝，「供應鏈補貨策略與長鞭效應之探討」，2002 中華民國科技 管理研討會論文集(光碟片)，1069-1073，義守大學 (2002)。
6. 曾渙釗(2006)，「存貨管理的兩難」，社團法人中華採購管理協會，2006 年 4 月號，第5 頁。
7. Armentano, V.A., P.M. Franca and Toledo, F.M.B. (1999), "A Net Work Flow Model for the Capacitated Lot-sizing Problem," Omega, Vol. 27, No. 2, pp. 275-284.
8. Beamon, B.M. (1998), "Supply Chain Design and Analysis: Models and Methods,"
International Journal of Production Economics, Vol. 55, Iss. 3, pp. 281-294.
9. Belvaux G. and Woley, L.A. (2000), "Bc-prod: A Specialised Branch-and-Cut System for Lot-Sizing Problems," Management Science, Vol. 46, No. 5, pp.
993-1007.
10. Belvedere, V. and Grando, A. (2005), "Implementing a pull system in batch/mix process industry thro theory of constraints: A case-study," Human Systems Management, Vol. 24, No. 1, pp. 3-12.
11. Belvedere, V. and Grando, A., "Implementing a pull system in batch/mix process industry through theory of constraints: A case-study," Human Systems Management, 24, 3-12(2005).
12. Bitran, G.R. and Yanasse, H.H. (1982), "Computational Complexity of the Capacitated Lot Size Problem," Management Science, Vol. 28, No. 10, pp.
1174-1186.
13. Blackstone, J. H. J.R., "Theory of constraints -a status report," International Journal of Production Research, 39, 6, 1053-1080(2001).
14. Blackstone, J.H. (2001), "Theory of constraints -a status report," International Journal of Production Research, Vol. 39, No. 6, pp. 1053-1080.
15. Chen W. H. and Thizy, J.M. (1990), "Analysis of Relaxations for the Multi-item Capacitated Lot-sizing Problem," Annals of Operations Research, Vol. 26, Iss. 1-4, pp. 29-72
16. Cole, H. and Jacob, D. (2002), Introduction to TOC Supply Chain, AGI institute.
17. Cole, H. and Jacob, D., Introduction to TOC Supply Chain, AGI institute (2002).
18. Diaby, M., H.C. Bahl, M.H. Karwan and Zionts, S. (1992), "Capaciated Lot-sizing and Scheduling by Lagrangean Relaxation," European Journal of Operational Research, Vol. 59, No. 3, pp. 444-458.
19. Dogramaci, A., J.C. Panayiotopoulos and Adam, N.R. (1981), "The Dynamic Lot-sizing Problem for the Multiple Items Under Limited Capacity," AIIT Transactions, Vol. 13, No. 4, pp. 294-303.
20. Florian, M., J.K. Lenstra and Rinnooy Kan, A.H.G. (1980), "Deterministic
Production Planning Algorithms and Complexity," Management Science, Vol. 26, No. 7, pp. 669-679.
21. Goldratt, E.M. (1994), It's Not Luck, England: Gower.
22. Goldratt, E.M., It's Not Luck, Gower, England, (1994).
23. Harris, F.W. (1913), "How many parts to make at once," The Magazine of Management, Vol. 10, No. 2, pp. 135-136.
24. Harris, F.W.(1990), "How many parts to make at once," Operations Research, Vol.
38, No. 6, pp. 947-950.
25. Hindi, K.S. (1996), "Solving the CLSP by a Tabu Search heuristic," Journal of the Operational Research, Vol. 47, No. 1, pp. 151-161.
26. Hoffman, G and Cardarelli, H., Implementing TOC Supply Chain: A Detailed Case Study - MACtac, AGI institute (2002).
27. Hoffman, G. and Cardarelli, H. (2002), Implementing TOC Supply Chain: A Detailed Case Study - MACtac, AGI institute.
28. Holt, J. R. (1999), "TOC in Supply Chain management," 1999 Constraints
Management Symposium Proceedings, March 22-23, Phoenix, AZ, U.S.A. pp. 85-87.
29. Holt, J. R., "TOC in Supply Chain management," 1999 Constraints Management Symposium Proceedings, pp.85-87, March 22-23, Phoenix, AZ, U.S.A.(1999).
30. Hopp, W. J. and Spearman, M. L., Factory Physics - Foundations of Manufacturing Management, Irwin (1996).
31. Karimi, B., S.M.T. Fatemi Ghomi and Wilson, J.M. (2003), "The Capacitated Lot Sizing Problem: A Review of Models and Algorithms," Omega, Vol. 31, Iss. 5, pp.
365-378.
32. Kendall, G.I., Viable Vision, Heliopolis Culture Group/SAGA Culture Publishing Co.(2006).
33. Lee, H. L., V. Padmanbhan and Whang, S. (1997), "The bullwhip effect in supply chains," Sloan Management Review, Vol. 38, No. 3, pp. 93-102.
34. Lee, Y.H. and Kim, S.H. (2002), "Production- Distribution Planning in Supply Chain Considering Capacity Constraints," Computers and Industrial Engineering, Vol. 43, No. 1-2 , pp. 169-190.
35. Lozano, S., J. Larraneta and Onieva, L. (1991), "Primal-dual Approach to the Single Level Capacitated Lot-sizing Problem," Vol. 51, No. 3, pp, 354-366.
36. Maes, J., J.O. McClain and Van Wassenhove, L.N. (1991), "Multilevel Capacitated Lot Sizing Complexity and LP-based heuristics," European Journal of Operational Research, Vol. 53, No. 2, pp. 131-148.
37. Novotny, D. J. (1997), "TOC Supply Chain Case Study," 1997 APICS Constraints Management Symposium Proceedings, April 17-18, Denver, Colorado, U.S.A., pp.
78-79.
38. Novotny, D. J., "TOC Supply Chain Case Study," 1997 APICS Constraints Management Symposium Proceedings, pp.78-79, April 17-18, Denver, Colorado, U.S.A.(1997).
39. Patnode, N. H. (1999), "Providing Responsive Logistics Support: Applying LEAN Thinking to Logistics," 1999 Constraints Management Symposium Proceedings, March 22-23, Phoenix, AZ, U.S.A., pp. 93-96.
40. Patnode, N. H., "Providing Responsive Logistics Support: Applying LEAN Thinking to Logistics," 1999 Constraints Management Symposium Proceedings, pp.93-96, March 22-23, Phoenix, AZ, U.S.A.(1999).
41. Perez, J.L., "TOC for world class global supply chain management," Computers Industrial Engineering, 33, 289-293(1997).
42. Schragenheim, E. and Ronen, B., "Buffer management: a diagnostic tool for
production control," Production and Inventory Management Journal (second quarter), 74-79(1991).
43. Sharma, K. (1997), "TOC Supply Chain Implementation: System Strategies," 1997 APICS Constraints Management Symposium Proceedings, April 17-18, Denver, Colorado, U.S.A., pp. 66-74.
44. Sharma, K., "TOC Supply Chain Implementation: System Strategies," 1997 APICS Constraints Management Symposium Proceedings, pp.66-74, April 17-18, Denver, Colorado, U.S.A.(1997).
45. Silver, E.A., D.F. Pyke and Peterson, R. (1998), Inventory Management and Production Planning and Scheduling, 3rd Edition, New York: John Wiley & Sons Inc.
46. Silver, E.A., Pyke, D.F., and Peterson, R., Inventory Management and Production Planning and Scheduling, 3rd Edition, John Wiley & Sons Inc. (1998).
47. Simatupang, T.M., Wright, A.C. and Sridharan, N., "Applying the theory of constraints to supply chain collaboration," Supply Chain Management: An International Journal, 9(1), 57-70(2004).
48. Simchi-Levi, D., P. Kamindky and Simchi-Levi, E. (2000), Designing and Managing the Supply Chain-Concepts, Strategies, and Case Studies, 2nd Edition, New York:
The McGraw-Hill Inc.
49. Smith, D. A., "Linking the Supply Chain Using the Theory of Constraints Logistical Applications and a New Understanding of the Role of Inventory/Buffer Management,
" 2001 Constraints Management Technical Conference Proceedings, pp.64-67, March 19-20, San Antonio, Texas, U.S.A. (2001).
50. Trigeiro, W.W. (1989), "A Simple Heuristic for Lot Sizing with Setup Times,"
Decision Sciences, Vol. 20, No. 2, pp. 294-303.
51. Trigeiro, W.W., L.J. Thomas and McClain, J.O. (1989), "Capacitated Lot Sizing with Setup Times," Management Science, Vol. 35, No. 3, pp. 353-366.
52. Waite, J., Gupta, S. and Hill, E., "Meritor HVS Story," 1998 APICS Constraints Management Symposium Proceedings, pp.1-9, April 16-17, Seattle Washington, AZ, U.S.A.(1998).
53. Waite, J., S. Gupta and Hill, E. (1998), "Meritor HVS Story," 1998 APICS
Constraints Management Symposium Proceedings, April 16-17, Seattle Washington, AZ, U.S.A., pp. 1-9.
54. Watson, K. and Polito, T. (2003), "Comparison of DRP and TOC financial performance within a multi-product, multi-echelon physical distribution
environment," International Journal of Production Research, Vol. 41, No. 4, pp.
741-765.
55. Watson, K. and Polito, T., "Comparison of DRP and TOC financial performance within a multi-product, multi-echelon physical distribution environment,"
International Journal of Production Research, 41, 4, 741-765(2003).
56. Wu, H. H. and Tsai, S. H., The Application of the TOC Replenishment System in TFT-LCD Module Plant," submitted to the MSOM 2007:Multi-echelon Inventory Conference, June 18-19, Tsinghua University, Beijing, China (2007).
57. Wu, H. H. and Tsai, T.P, "The Study of the TOC Replenishment System in Supply Chain," submitted to the 22nd European Conference on Operation Research, July 8-11, 2007, Prague, Czech Republic (2006).
58. Yuan, K.J., Chang, S.H. and Li, R.K., "Enhancement of theory of constraints replenishment using a novel generic buffer management procedure," International Journal of Production Research, 41, 4, 725-740(2003).
59. Yuan, K.J., S.H. Chang and Li, R.K. (2003), "Enhancement of Theory of Constraints Replenishment using a Novel Generic Buffer Management Procedure," International Journal of Production Research, Vol. 41, No. 4, pp. 725-740.
60. 余家福與吳鴻輝，「限制理論之存貨緩衝補貨政策對供應鏈的存貨與有效產出 之影響」，2002 中華民國科技管理研討會論文集(光碟片)，741-746，義守大學 (2002)。
無衍生研發成果推廣資料
96 年度專題研究計畫研究成果彙整表
計畫主持人：吳鴻輝 計畫編號：96-2628-E-216-001-MY3
計畫名稱：限制理論供應鏈補貨機制在考慮工廠產能限制下之方法研究 量化
成果項目 實際已達成
數（被接受 或已發表）
預期總達成 數(含實際已
達成數)
本計畫實 際貢獻百
分比
單位
備 註 （ 質 化 說 明：如 數 個 計 畫 共 同 成 果、成 果 列 為 該 期 刊 之 封 面 故 事 ...
等）
期刊論文 0 0 100%
研究報告/技術報告 0 0 100%
研討會論文 0 0 100%
論文著作 篇
專書 0 0 100%
申請中件數 0 0 100%
專利 已獲得件數 0 0 100% 件
件數 0 0 100% 件
技術移轉
權利金 0 0 100% 千元
碩士生 0 0 100%
博士生 0 0 100%
博士後研究員 0 0 100%
國內
參與計畫人力
（本國籍）
專任助理 0 0 100%
人次
期刊論文 1 1 100%
研究報告/技術報告 0 0 100%
研討會論文 5 5 100%
論文著作 篇
專書 0 0 100% 章/本
申請中件數 0 0 100%
專利 已獲得件數 0 0 100% 件
件數 0 0 100% 件
技術移轉
權利金 0 0 100% 千元
碩士生 2 2 100%
博士生 0 0 100%
博士後研究員 0 0 100%
國外
參與計畫人力
（外國籍）
專任助理 0 0 100%
人次
其他成果 (無法以量化表達之成 果如辦理學術活動、獲 得獎項、重要國際合 作、研究成果國際影響 力及其他協助產業技 術發展之具體效益事 項等，請以文字敘述填 列。)
無
成果項目 量化 名稱或內容性質簡述
測驗工具(含質性與量性) 0
課程/模組 0
電腦及網路系統或工具 0
教材 0
舉辦之活動/競賽 0
研討會/工作坊 0
電子報、網站 0
科 教 處 計 畫 加 填 項
目 計畫成果推廣之參與（閱聽）人數 0