[1] C. R. Paul, Introduction to Electromagnetic Compatibility, New York:
Wiley, 1992.
[2] K. B. Hardin, and C. R. Paul, “Decomposition of radiating structures using the ideal structure extraction methods (ISEM),” IEEE Trans.
Electromagn. Compat., vol. 35, no. 2, pp. 264–273, May 1993.
[3] J. D. Gavenda, “Measured effectiveness of a toroid choke in reducing common-mode current,” in Proc. IEEE Int. Symp. Electromagnetic Compatibility, 1989, pp. 208–210.
[4] Y. Kaizaki, F. Tsuda, and S. Shinohara, “Development of common mode filter with a multilayer structure,” in Proc. IEEE Int. Symp.
Electromagnetic Compatibility, 1999, pp. 794.
[5] T. Sato, S. Ikeda, Y. Hara, K. Yamasawa, and T. Sakuma, “A new multilayered common-mode filter on Ni–Zn ferrite substrate,” IEEE Trans. Magnetics, vol. 37, no. 4, pp. 2900–2902, July 2001.
[6] T. Sato, T. Kokai, A. Moroishi, K. Yamasawa, H. Karasawa, and T.
Sakuma, “Mn-Zn ferrite particle/polyimide composite thick film and its application to a coupled transmission line common-mode filter,”
in Proc. IEEE Int. Magnetics Conf., 2002, pp. BU4.
[7] B. C. Tseng, and L. K. Wu, “Design of Miniaturized Common-Mode Filter by Multilayer Low-Temperature Co-Fired Ceramic,” IEEE Trans. Electromagn. Compat., vol. 46, no. 4, pp. 571–579, Nov. 2004 [8] Commercial Building Telecommunications Cabling Standard Part1:
General Requirement, TIA/EIA-568-B.1-2001.
[9] Howard Johnson and Martin Graham, High-Speed Signal Propagation Advance Black Magic, Prentice Hall 2003.
[10] Douglas Brooks, “Ground Bounce, Parts 1 and 2,” UltraCAD
Design, Inc. Appeared in Printed Circuit Design, a Miller Freeman publication, Aug. and Sept. 1997.
[11] R. F. German, H. W. Ott, and C. R. Paul, “Effect of an image plane on printed circuit board radiation,” in Proc. IEEE Int. Symp.
Electromagnetic Compatibility, 1990, pp. 284–291.
[12] Douglas Brooks, “Differential Signals: Rules to Live By,” UltraCAD Design, Inc. Appeared in Printed Circuit Design, a CMP Media publication, Oct. 2001.
[13] David M. Pozar, Microwave Engineering, John Wiley & Sons, Inc.1998.
[14] Douglas Brooks, “Differential Impedance: What's the Difference,”
UltraCAD Design, Inc. Appeared in Printed Circuit Design, a CMP Media publication, Oct. 2001.
[15] Douglas Brooks, “Differential Design Rules: Truth vs Fiction,”
UltraCAD Design, Inc. Mentor Graphics Article Series, 2002.
[16] “UCCALC.exe, Differential Impedance Transmission Line Calculator.” UltraCAD Design, Inc. http://www.ultracad.com [17] C. R. Paul, “A comparison of the contributions of common-mode
and differential-mode currents in radiated emissions,” IEEE Trans.
Electromagn. Compat., vol. 31, no. 2, pp. 189–193, May 1989.
[18] 黃奐衢, “The Reduction of RF Crosstalk Interference to VLSI,” 國 立交通大學電子工程研究所碩士論文, 2003.
[19] F.J. Tilley, “Reducing radiated emissions on high speed signal lines using common mode choke coils,” in Proc. IEEE Int. Symp.
Electromagnetic Compatibility, 1995, pp. 435–439.
[20] N. Kuwabara, F. Amemiya, H. Asou, “Design and characteristics of common-mode choke coil for high-speed LAN port using UTP cable,” in Proc. Telecommunications Energy Conf., 2003, pp.
586–591.
[21] 吳霖堃 教授,
電磁相容
, 國立交通大學電信工程研究所, 2003.[22] 王志会, “
应用于微波和
RF电路中的厚膜材料和工艺
”, 电子十 三所, 石家庄 050051[23] 陳志銘 助理教授, “
電子構裝技術與材料
CH13陶瓷構裝
”, 中 興大學化工系[24] 謝宗雍 教授, “
陶瓷構裝
”, 材料科學與工程研究系所[25] “Low Temperature Cofired Ceramic Design Guidelines,” Scrantom, Inc. A Natel Company, Feb. 09, 2004.
[26] 謝宗雍 教授, “
薄
/厚膜技術
”, 材料科學與工程研究系所 [27] Antti Vimpari, “RF Design for LTCC,” VTT Electronics,Manufacturing Technology, May 16, 2002.
[28] Kari Kautio, “Introduction to Low Temperature Co-fired Ceramics,” VTT Electronics, LTCC Tutorial.
[29] 楊立群, “
低溫共燒陶瓷嵌入式電感與電容元件之設計與模型 化
”, 國立中山大學電機工程學系碩士論文, 2002.[30] K. H. Drue, H. Thust, and J. Muller, “RF models of passive LTCC components in the low Gigahertz-range,” Applied Microwave and Wireless, pp.26–35, April 1998.
[31] Universal Serial Bus Specification Revision 1.1, Sept. 23, 1998.
[32] Universal Serial Bus Specification Revision 2.0, April 27, 2000.
[33] 徐千祐, “
認識
IEEE 1394與
USB”, March 02, 2003.[34] “EMI FILTER AND LINE TERMINATION FOR USB DOWNSTREAM PORTS,” STMicroelectronics, May 2000.
[35] Jim Choate, “Platform Design Considerations,” Intel Corporation, June 02, 2002.
[36] High Speed USB Platform Design Guidelines Rev. 1.0, Intel Corporation, April 26,2001.
[37] “Computing Differential Pairs”, “Differential Admittance and Impedance Matrices”, “Differential S-Matrices”, “Setting up Differential Pairs,” HFSS Online Help.
[38] D. E. Bockelman and W. R. Eisenstadt, “Combined differential and common-mode scattering parameters: Theory and simulation,”
IEEE Trans. Microwave Theory Tech., vol. 43, no. 7, pp, 1530–1539, July 1995.
[39] “Concepts in balanced device measurement,” Agilent technologies, Application note 1373-2, March 08, 2002.
[40] “De-embedded S-matrices,” HFSS Online Help.
[41] Antti Vimpari, “The Characterisation of the integrated RF Passive Components in LTCC,” VTT Electronics, Proc. of IMAPS Nordic 2002.
[42] J. R. Long and M. A. Copeland, “The modeling, characterization, and design of monolithic inductors for silicon RF IC's,” IEEE J.
Solid-State Circuits, vol. 32, no. 3, pp. 357–369, March 1997.
[43] A. Sutono, D. Heo, Y.-J. Emery Chen, and J. Laskar, “High-Q LTCC-based passive library for wireless system-on-package (SOP) module development,” IEEE Trans. Microwave Theory Tech., vol.
49, no. 10, pp. 1715–1724, Oct. 2001.
[44] “Common-mode Choke Coil for Surface Mounting,” TOKO, B4F http://www.toko.com.hk/Catalog/coil_filter/common_mode_choke_
coil/pdf/b4f.pdf
[45] Dong Gun Kam, Heeseok Lee, Seungyong Baek, Bongcheol Park, and Joungho Kim, “GHz twisted differential line structure on
printed circuit board to minimize EMI and crosstalk noises,” in Proc.
52nd Electronic Components and Technology Conf., 2002, pp.
1058–1065.
[46] T. S. Horng, J. M. Wu, L. Q. Yang, and S. T. Fang, “A novel modified-T equivalent circuit for modeling LTCC embedded inductors with a large bandwidth,” in Proc. IEEE MTT-S Int.
Microwave Symp. Dig., 2003, pp. 1015–1018.
[47] 邱基綜, “