不同型式風扇與操作狀況控制室內熱環境之比較

The glass molding at a lower temperature will confine the glass flowing outwards which favors the molded plano-convex lenses with the same curvature as the glass preform.. The

As the Nield Number increases to infinity, solid and liquid come to the same temperature to achieve a local thermal equilibrium.. The increase of N A indicates an

According to the research of indoor air quality conducted by National Institute for Occupational Safety and Health, NIOSH, 53% of the problem of indoor air quality is resulted

This study investigates the effects of the initial concentration, initial pH value, and adsorption temperature on the adsorption behaviors between Cr(IV) ion with a

The effects of radius of the pulse laser and ratio of delay times on the temperature distributions were discussed in detail.A nondiemensional parameter B was defined as the ratio

The results showed that (1) to establish an accurate forecast model, the strength model needs more than 100 mix proportion experiments; the slump model only needs 50 mix

The numerical results of the stress distribution and the plastic deformation along the center line (interface) of the lateral plate show that the weight of the plate is reduced to

Therefore, the purpose of this study is to perform a numerical analysis on the thermal effect of shape-stabilized PCM plates as inner linings on the indoor air temperature