• 沒有找到結果。

高層建築排水系統性能評估與設計方法之研究

N/A
N/A
Protected

Academic year: 2021

Share "高層建築排水系統性能評估與設計方法之研究"

Copied!
14
0
0

加載中.... (立即查看全文)

全文

Loading

數據

圖 2 系統分類架構            資料來源:本研究整理  圖 3 系統分類方式         資料來源:本研究整理  四、研究程序概念之提出  經由前述調查案例分析與分類方式之建立,本研究後續將進一步探討系統之設計決 策程序,如圖 4 所示,整體設計投入基本資料並完成各項因子之選擇後,將可呈現系統 設計成果,此時若將系統拆解為七大項目,並分項討論各採用因子之優劣,將能獲得整 體系統之評估表現權重值。若將上述研究概念加以展開,並由各項目之因子組成完整排 水通氣系統,再由整體系統分項探討各因子性能權
圖 4 設計方法與性能評估研究概念圖    本研究整理  圖 5 設計方法與性能評估研究概念展開圖  本研究整理 經由前述研究程序之提出,本研究將持續探討排水系統各項設計因子,其中在排水 系統設計因子方面,可分為三大類別與 16 項因子,而排水系統之主要目的,在於將污 物、污排水能藉由重力作用,無障礙地搬送至外部污水處理設施,良好的排水系統設計, 能減緩因排水而造成之管內阻塞;反之,經由流體現象與壓力分布理論推估後,不良之 排水系統,可能造成許多排水課題,甚至形成管路失敗與危及居室空間使用者之健康安 全,因
圖 6 設計組成因子分析內容與架構    本研究整理  (一)設計資料  內容包含項目名稱與本研究所賦予之代號,而在系統類別方面,可分排水系統、 通氣系統以及排水/通氣併用等三類,主要定義是以管路系統所在位置加以區隔。其 次探討適用構造,應以 SRC 或 SC 構造為主。  (二)設計圖示說明  內容包含以完整昇位圖示呈現整體設計範圍,以及簡要昇位圖示與配管空間部 位說明,其中簡要圖示部分,是以原始昇位圖檔加以裁減,方便使用者對照,而在 配管空間與部位方面,則可概分為:   1.昇頂通氣管部。   2.垂直
圖 7  設計因子圖表內容說明圖                            本研究整理  五、建立設計決策程序  本研究研提適切之設計決策程序,供專業技術者進行參考;設計程序將於七大項目 中進行個別系統決策,並於各項目中選取單一因子,完成整體系統設計程序,本研究以 樹狀圖加以表示,如圖 8 所示:  圖 8 系統設計過程樹狀圖         本研究整理
+2

參考文獻

相關文件

Therefore, this research paper tries to apply the perspective of knowledge sharing to construct the application model for the decision making method in order to share the

The purpose of this research lies in building the virtual reality learning system for surveying practice of digital terrain model (DTM) based on triangular

The objective is to evaluate the impact of personalities balance in a project management team on the team’s performance.. To verify the effectiveness of this model, two

This research intent to establish the ecosystem system database and ecosystem potentials analysis to evaluate the modal, being provided for programming of coastal and ocean

The purpose of this study is to analyze the status of the emerging fraudulent crime and to conduct a survey research through empirical questionnaires, based on

This research is based on the consumer decision- making theory, to study what may affect people to join the army force and the intention to enlist oneself in military force.. We

The purpose of this paper is to use data mining method in semiconductor production to explore the relation of engineering data and wafer accept test.. In this paper, we use two

The purpose of this research is to study the cross-strait visitor’s tourist experience.With the research background and motives stated as above, the objectives of this research