限制輸出貨品明細表

(1)

限制輸出貨品明細表

序號 CCC 號列貨名名稱

1 7210.70.10.00-5 塗漆、清漆或被覆塑膠之鐵或非合金鋼扁軋製品，具電氣特

性，以頻率50 赫芝最大磁通密度 1.5 韋伯／平方公尺時鐵心

損失在6.5 瓦特／公斤及以上者

Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at

frequency of 50Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more

性，以頻率 50 赫芝最大磁通密度 1.5 韋伯／平方公尺時鐵心損失在 5 瓦特／公斤及以上但未達 6.5 瓦特／公斤者 Flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics, with electrical characteristics, at

frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss5 W/kg or more but less than 6.5 W/kg

性，以頻率50 赫芝最大磁通密度 105 韋伯／平方公尺時鐵

心損失低於5 瓦特／公斤者

frequency of 50Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5 W/kg

4 7210.70.90.11-5 以熱浸鍍鋅為底材之塗漆、清漆或被覆塑膠之鐵或非合金鋼

扁軋製品

Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc

5 7210.70.90.12-4 以熱浸鍍鋅鋁合金為底材之塗漆、清漆或被覆塑膠之鐵或非

合金鋼扁軋製品

Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-

aluminium alloys

1

(2)

6 7210.70.90.13-3 以熱浸鍍鋅鋁鎂合金為底材之塗漆、清漆或被覆塑膠之鐵或非合金鋼扁軋製品

Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc-

aluminium-magnesium alloys

7 7210.70.90.19-7 其他以熱浸鍍鋅合金為底材之塗漆、清漆或被覆塑膠之鐵或

非合金鋼扁軋製品

Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc alloys

8 7210.70.90.20-4 以熱浸鍍鋁鋅為底材之塗漆、清漆或被覆塑膠之鐵或非合金

鋼扁軋製品

Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on hot-dipped with zinc alum

9 7210.70.90.30-2 以電解法鍍或塗鋅或鋅合金為底材之塗漆、清漆或被覆塑膠

之鐵或非合金鋼扁軋製品

Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on electrolytically plated or coated with zinc or zinc-alloy

10 7210.70.90.40-0 以冷軋為底材之塗漆、清漆或被覆塑膠之鐵或非合金鋼扁軋製品

Flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics, based on cold-rolled

11 7210.70.90.90-9 其他塗漆、清漆或被覆塑膠之鐵或非合金鋼扁軋製品 Other flat-rolled products of iron or non-alloy steel, painted, vanished or coated with plastics

損失在6.5 瓦特／公斤及以上

frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 6.5 W/kg or more

2

(3)

損失在5 瓦特／公斤及以上但未達 6.5 瓦特／公斤者

frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss 5 W/kg or more but less than 6.5 W/kg

損失低於5 瓦特／公斤者

frequency of 50 Hz and magnetic flux density of 1.5 Wb/m2, the iron loss less than 5W/kg

15 7212.40.90.00-3 其他塗漆、清漆或被覆塑膠之鐵或非合金鋼扁軋製品 Other flat-rolled products of iron or non-alloy steel, painted, varnished or coated with plastics

16 7225.99.10.00- 5EX

其他合金鋼之扁軋製品，寬度600 公厘及以上，經鍍面、塗

面或護面者，高速鋼除外

Flat-rolled products of other alloy steel, plated, coated or clad, of a width of 600 mm or more, excluding high speed steel

17 7226.99.90.00-7 其他合金鋼扁軋製品，寬度小於600 公厘者

Flat-rolled products of other alloy steel, of a width of less than 600 mm

3

限 制 輸 出 貨 品 明 細 表