[PDF] Top 20 Doped Waveguide Based on Sol Gel Process
Has 10000 " Doped Waveguide Based on Sol Gel Process " found on our website. Below are the top 20 most common " Doped Waveguide Based on Sol Gel Process ".
Doped Waveguide Based on Sol Gel Process
... properties can be closely related in functionality to organic polymers for low temperature and ease of processing, and to conventional inorganic glasses for hardness, chemical and thermal stability, and transparency. The ... See full document
25
following: Section 2-1 introduces the technique of Sol-Gel waveguide and
... Erbium doped waveguide amplifier based sol gel method EDWAs have been demonstrated using a variety of materials systems and fabrication ...EDWAs based on ion exchange ... See full document
33
Memory Effect of Sol-Gel Derived V-doped SrZrO3 Thin Films
... properties. Sol-gel method has the advantages that include low cost, easy stoichiometric control, and high ...of process conditions of thermal treatment on the physical properties of the films ... See full document
4
Memory effect of sol-gel derived V-doped SrZrO3 thin films
... low process temperature. In this paper, we used the sol – gel method to deposited V-doped SZO films to investigate their electrical and physical ...properties. Sol – gel method ... See full document
4
Structure and luminescent properties of LaNbO4 synthesized by sol–gel process
... the use of the compound as a potential blue phosphor for field emission display (FED) applications. To our knowledge, works of the luminescence behavior of the niobate-based complex formed by the citric gel ... See full document
3
Effect of Sn-doped on microstructural and optical properties of ZnO thin films deposited by sol-gel method
... In this study, transparent thin films of Sn-doped ZnO (ZnO:Sn) were deposited onto alkali-free glass substrates by a sol –gel method; the effect of Sn doping on crystallinity, microstructural ... See full document
5
A visible-light response vanadium-doped titania nanocatalyst by sol–gel method
... V/TiO 2 -NE irradiated under visible light at ambient tem- perature. The rate was calculated based on a 6-h irradia- tion, and was found zeroth order at the experimental con- ditions. The catalyst, 0.035 ... See full document
7
Resistive switching properties of sol-gel derived Mo-doped SrZrO3 thin films
... b Winbond Electronics Corp., Hsinchu 300, Taiwan Available online 2 August 2007 Abstract Hysteretic I–V characteristics of the SrZrO 3 (SZO) thin films with various Mo-doping concentrations were investigated in the ... See full document
4
Sol–gel pyrolysis and photoluminescent characteristics of europium-ion doped yttrium aluminum garnet nanophosphors
... Keywords: Sol–gel process; Y 3 Al 5 O 12 ; Nanoparticles; Phosphors ...YAG doped with lanthanides such as Nd 3 + and Ce 3 + is already used in the construction of dye lasers and new generation ... See full document
7
Stable and tunable fiber double-ring laser based on an erbium-doped waveguide amplifier
... exchange process in Er/Yb- doped phosphate glass, has the same advantages of the EDFA, such as low noise figure, low polarization depen- dence, and no cross talk between WDM ... See full document
3
Transparent photo-curable co-polyacrylate/silica nanocomposites prepared by sol-gel process
... composites based on polymers have been widely investigated and they have many practical applications due to their unique physical and chemical ...situ sol-gel process, has been widely ... See full document
10
Resistance switching properties of sol-gel derived SrZrO3 based memory thin films
... voltage on the device, the oxygen vacancies, metallic elements or carbon would form conducting filaments as the conducting paths and the leakage-state is changed to the ...voltage on the device, the ... See full document
6
Characterization of Zr-doped TiO2 nanocrystals prepared by a nonhydrolytic sol-gel method at high temperatures
... NHSG process is relatively slower than the HSG approach, it usually requires temperatures exceeding 80 ° ...depending on the type of the metal halide and the concentration of ... See full document
7
Fluorescence enhancement and structural development of sol-gel derived Er3+-doped SiO2 by yttrium codoping
... Article on the web 4th March 2002 Er 31 –Y 31 codoped SiO 2 powdered bulks were prepared by a sol–gel ...codoping on the fluorescence properties and structural development of Er 31 ... See full document
6
The Influences of Water Content on Synthesis of (Pb,Ba)TiO3 Materials using Acetylacetone as Chelating Agent in Sol-Gel Process
... to sol-gel systems that yield crys- talline products at low temperatures, which cannot be simultaneously implemented: incorporation of high wa- ter content to avoid carbonate formation; preparation of ... See full document
4
Luminescence characteristics of europium-ion doped BaMgAl10O17 phosphors prepared via a sol–gel route employing polymerizing agents
... Europium-ion doped BaMgAl 10 O 17 phosphors were prepared via both a sol–gel route and the conventional solid-state ...conditions on the optical properties of BaMgAl 10 O 17 based ... See full document
7
Thickness-dependent microstructures and electrical properties of CaCu3Ti4O12 films derived from sol-gel process
... SFA process with deposition layer numbers 2, 3, 4, and 5 possess 210, 280, 420, and 490 nm in thickness, ...MFA process, the film thicknesses are 230, 440, 520, and 630 ...occurred, based on ... See full document
6
Effects of Mg incorporation on the optical properties of ZnO prepared by the sol-gel method
... I. INTRODUCTION ZnO represents an alternate candidate for use in opto- electronic application in the short wavelength range 共green, blue, and ultraviolet兲 because ZnO displays a wide band gap 共⬃3.3 eV兲 comparable to ... See full document
4
A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection
... fabricated waveguide sensors is sensitive to the PECVD processing control of reactive gases flow volume, RF power, substrate temperature, vacuum pressure, and annealing ...ing process is critical for the ... See full document
7
The formation of perovskite PbTiO3 powders by sol-gel process
... 470 C.-Y. Lee et al. / Materials Chemistry and Physics 97 (2006) 468–471 Fig. 2. TEM images and corresponding electron diffraction patterns of the powder calcinated at 973 K. the powder calcinated at 973 K. The size of ... See full document
4
相關主題